Software Support & Downloads

Support for your CompuTrainer® or Velotron® in the way of software updates is typically limited to software currently being developed on. Once software becomes obsolete (Legacy Software) we may still leave it on the site as a service to our customers who may need it, but the support available to you may be limited only to this. You are welcome to contact us regarding use of Legacy Software, but be aware that the support of this software is very limited.


RacerMate Software System Requirements

Please read this page for RacerMate One, Velotron, and Real Course Video software requirement information.

CompuTrainer™ Software Downloads

What is RacerMate One?

RacerMate One is a replacement for all previous software applications created for CompuTrainer. RacerMate One is a work in progress as time and funding allows. The first release supported CompuTrainer home users (1 or 2 CompuTrainers); the 2nd release included Course Creator; 3+ rider 3D Cycling is currently done and in testing; Classic MultiRider may be retired with the advent of other 3rd-party applications. The most recent version also fully supports Velotron hardware. 

License Registration is No Longer Required!

RacerMate One, Versions 4.1.0.5+

RacerMate One v4.1.0.5 (Current Version). This updated version of RacerMate One, while providing the usual minor bug-fixes, primarily does away with the license registration system - making installations on additional computers or re-installation on a new computer so much easier. This release also unifies RacerMate One as a single software release that provides full support to CompuTrainer and Velotron users alike. This installer is a stand-alone version and does not require any prior versions of RM1 to be installed.


DOWNLOAD & INSTALLATION

  1. If you have any existing installation(s) of RacerMate One, uninstall them before installing this v4.1.0.5 version. Doing so will eliminate any possible license registration issues. 
  2. Download the Stand-alone Installer by clicking the following link:  RacerMate One v4.1.0.5 Setup
  3. Unzip the file and run RM1_4105_setup.exe to install. 
  4. OPTIONAL: If you have an ANT+ compatible heart rate sensor that you would like to use with RacerMate One, click the following link for assistance with installing an ANT+ Patch for RM1: Click Here for ANT+ Support

Support Files Microsoft .NET Framework 3.5 SP1

PDF created from the Help System Courtesy of Ray Ruyack RM1 Manual (PDF)

Visit our Web Forum

Forum Link For RacerMate One

Questions? Contact Us!

These older versions of RacerMate One are maintained here for archival purposes. None of these are required prerequisites to installing the current v4.1.0.5 version.


RACERMATE ONE 4.0.2 - DEMO VERSION – or Web-based install (users lacking CD drive for install) This version is the same as what you would receive on a software disc, but will only run in DEMO MODE until it is registered. Registration can only occur once you have a registration key. To obtain a registration key and further information on registering the software, please click here. This version can be downloaded and installed on computers lacking a CD-ROM drive. While in an unregistered state, the software will NOT communicate with the trainer while on the race screens and is used solely as a demo version (see demo mode instructions below). Version 4.0.2 - Download here Known issues:
  1. Velotron support is nominal with Gearing selections not passing through to real-time riding.and SpinScan has Left-Right leg data reversed. Response: The Velotron is not completely supported in the initial release. Work on debugging Velotron features will begin when we are working on that phase of development.
  2. Average speed and power updates in 0.2 increments. Response: The data is still accurate and this is caused by a rounding issue. We will address this in a future release.
  3. Windows XP users may notice issues or crashes while running RacerMate One. Response: XP has reached end-of-life status and is no longer supported. Users can try the software, but there is little we can do if it fails to function. Users can try to update all drivers, but there is no support for it now from Microsoft, which makes it near impossible to support it as well.

RACERMATE ONE VERSION 4.0.6 PATCH This version adds Course Creator and a few other improvements to RacerMate One version 4.0.2. 4.0.2 must be installed to apply this patch. Improvements and changes were made to the RacerMate One Help system to walk you through the use of Course Creator. Version 4.0.6 - Download here. The above link requires installing 4.0.2 first Known issues:
  1. Users with Windows running a language other than ENGLISH will have issues opening Course Creator. It will fail. We are looking into this and think it may be related to data having commas instead of periods in European file formats. Current work-around is to install an English update to Windows and switch to it if you are needing to create a course.
  2. Installing this patch may push a pacer into Rider position #1 on 3D Cycling causing a no connection experience (see our #1 FAQ). To resolve make sure your hardware setup and rider position is in sync.
Version 4.0.7 Update Patch - Download here. View Notes & Changes in README.TXT

MultiRider™ software allows up to eight riders on CompuTrainers to connect to one computer using a USB hub and USB-to-Serial adapters. Study the information in the Readme file during software installation or PDF manual supplied (below or supplied with the software) to minimize installation and setup issues you may experience getting 8 systems connected.

MultiRider consists of 4 applications:
MultiRider Time Trial
MultiRider Team Time Trial
MultiRider Coach
MultiRider Real Course Video - videos sold separately Note: There is no update patch to go from versions 1-3 of MultiRider to MultiRider 2009.

MultiRider Software Download Links
Use this link to download your free copy of MultiRider. MultiRider 2009 will install in a different location from MultiRider III. You should read carefully the readme files for important information regarding the transfer of your MR III riders.csv file for use in MR 2009!

MultiRider Update 2014
Release date: February 20, 2014

Download Here

• Requires MultiRider 2009 full version.
• Fixes issue with rider setup corruption.
• Added different logo and rider images to help differentiate this version for users.
• See readme file during installation for instructions on use.

MultiRider Manual Control
Release date: July 20, 2010

Download here

Download this little utility to manually control up to 8 riders.
• Requires MultiRider 2009 full version.

MultiRider 2009 Manual – PDF File


Indoor Time Trial platform plans – PDF File

MultiRider Forum Link

Questions? Contact Us!

The stand-alone applications of Real Course Video have not needed any updates prior to their inclusion into RacerMate One. Technically, the versions found below are “legacy software applications” in regard to development work. Because users of RacerMate One require this legacy application to register each video (until what time RacerMate One can also register videos), it is still being shown within the current software support links.

RacerMate One Real Course Video features (over legacy version) are as follows:
•Two-rider split screen.
•Better control over start and ending of course.
•Able to select a section of video and ride multiple laps of that section.
•Better control of video sizing/scaling.

Reason to maintain use of legacy Real Course Video:
•Video registration.

Full CompuTrainer version with sample video
Release date: Feb. 26, 2008
Download here

This is the same version supplied on the Real Course Video discs and can be used to try the software out on the computer before purchasing an actual video course.

RCV update patch – CompuTrainer
Release date: Feb. 26, 2008
Download here
Requires Real Course Video full version


Misc. Course Fixes – Zipped
Kona (created Apr. 24, 2008)
Lake Placid (created Feb. 27, 2009)
Wisconsin (created Apr. 2, 2012)

Unzip the file into the appropriate video folder to replace the old files. Current video (after the above dates) contain these fixes, so check the dates if you are unsure – or just install them to be sure.

IRCV Manual – PDF File

Support Files
Latest Xvid codec
(This may be required for Windows 7 or Windows 8 support)

2008 version of the Microsoft Visual C++ 2008 Redistributable Package (x86)
Download Link

Real Course Videos Forum Link

Questions? Contact Us!

Time Trial Software allows you to ride along with legendary athletes like Andy Potts on courses like the NYC Triathlon course. Establish your ranking by uploading your race time to the CompuTrainer Perpetual Ranking Site. Review your time trial performance data in a table showing date, weight, finish time, average/peak speed, avg/peak watts, avg RPM, Watt/Kg. The overall Ranking database is sortable by any variable including race site, city, state, and country.

Velotron Software Downloads

What is RacerMate One?

RacerMate One is a replacement for all previous software applications created for CompuTrainer & Velotron. RacerMate One is a work in progress as time and funding allows. The first release supported CompuTrainer home users (1 or 2 CompuTrainers); the 2nd release included Course Creator; 3+ rider 3D Cycling is currently done and in testing; 

 
Current Version of RacerMate One: v4.1.0.6

 This RacerMate One v4.1.0.6 Update fixes a bug that causes the program to crash while starting up, after having edited the VT gears to add an 11th REAR COG. There are 2 solutions to fix this issue, provided in detail below.

In RM1 v4.1.0.5, after you add and save an 11th rear cog, the program will no longer run - it will crash every time, shortly after trying to open/launch RM1). This leaves you with no way to get back into the program and adjust the settings needed to prevent it from crashing constantly on load. There are 2 solutions for this issue:

  1. Recommended Solution: Download, unzip and install RM1 v4.1.0.6. This is a full program installation and does not require an existing installation of RM1.
  2. RM1 v4.1.0.5 Recovery: To recover from this issue (restore normal operation), without upgrading to v4.1.0.6, delete the file "RM1_RiderDB.xml" or edit it and delete the line with some number ("XX" in the image below) between a start and end G11 tag. This file is found in the following location (using default settings):

C:Users(Your User Name)DocumentsRacerMateSettingsRM1_RiderDB.xml
Substitute your Windows account name for (Your User Name)  

 
Line to delete from RM1_RiderDB.xml

Line to delete from RM1_RiderDB.xml

 
After making either of the changes mentioned above, you will be able to start RM1 v4.1.0.5 as usual. You will see a message about recovering the RM1_RiderDB.xml file to a fully reset defaults version if you deleted it. Just click OK and that's it. 
 
Note: This 2nd option is only for people wanting to recover normal operation of RM1 v4.1.0.5, and while usable, if anyone ever adds that 11th Rear Cog and saves that configuration, RM1 will once again crash on loading until you either repeat the steps above, or install the newer v4.1.0.6 version.
   
 
DOWNLOAD & INSTALLATION FOR RACERMATE ONE v4.1.0.6

  1. Download the Stand-alone Installer by clicking the following link:

    RacerMate One v4.1.0.6 Setup
  2. Unzip the file and run RM1_4106_setup.exe to install. 
  3. OPTIONAL: If you have an ANT+ compatible heart rate sensor that you would like to use with RacerMate One, click the following link for assistance with installing an ANT+ Patch for RM1:

    Click Here for ANT+ Support
 

Support Files Microsoft .NET Framework 3.5 SP1

PDF created from the Help System Courtesy of Ray Ruyack RM1 Manual (PDF)

Visit our Web Forum

Forum Link For RacerMate One

Questions? Contact Us!

 

These older versions of RacerMate One are maintained here for archival purposes. None of these are required prerequisites to installing the current v4.1.0.5 version.

RACERMATE ONE: VELOTRON EDITION

**This version of RacerMate One is for all Velotron users & any CompuTrainer users having trouble registering any prior versions (v4.0.x)** This version does not require registration and therefor may be a good option for CompuTrainer users who have trouble registering a 4.0.X version of the software. Aside from that, all other changes only apply to Velotron Users - bringing full compatibility with the Velotron platform. Download and install the main program like you would with any program. We also recommend installing Visual C++ redistributable when the installer prompts you to. If you don’t have this, then the software will not function properly. ⇒  Main Program: RM1 Version 4.1.0.3a Setup Download the version 4.1.0.4 Update below, unzip the file then run the update installer to update to RacerMateOne 4.1.0.4 Velotron Edition. ⇒  Version 4.1.0.4 Update: RM1 Version 4.1.0.4 Update Installer

Until RacerMate One is a replacement for all previous Velotron software applications, the following links are to support the current software supplied with Velotron. The exception will be for Wingate software, which the only update you will see is a patch for and not a full version as for all other applications.

Velotron3D
Download here – released 3/12/2009
Velotron 3D Software Manual
The above link is a full version of Velotron 3D. If you have an older version, please replace it with this version.

Velotron CS
Download here – released 12/23/2008
Coaching Software Manual
The above link is a full version of Velotron Coaching Software. If you have an older version, please replace it with this version.

Vergo Metabolic Controller
Download here – released 12/23/2009
Vergo Software Manual
The above link is a full version of Vergo. If you have an older version, please replace it with this version.

Wingate Software
Download here – released 7/15/2010
Wingate Software Manual"
The above link is an update to Wingate. If you already own a copy of Wingate, but need to download the full version please request a copy via email.

The stand-alone applications of Real Course Video have not needed any updates prior to their inclusion into RacerMate One. Technically, the versions found below are “legacy software applications” in regard to development work. Because users of RacerMate One require this legacy application to register each video (until what time RacerMate One can also register videos), it is still being shown within the current software support links.

RacerMate One Real Course Video features (over legacy version) are as follows:
•Two-rider split screen.
•Better control over start and ending of course.
•Able to select a section of video and ride multiple laps of that section.
•Better control of video sizing/scaling.

Reason to maintain use of legacy Real Course Video:
•Video registration.

Full Velotron version with sample video
Release date: Nov. 25, 2008
Download here

This is the same version supplied on the Real Course Video discs and can be used to try the software out on the computer before purchasing an actual video course.


Misc. Course Fixes – Zipped
Kona (created Apr. 24, 2008)
Lake Placid (created Feb. 27, 2009)
Wisconsin (created Apr. 2, 2012)

Unzip the file into the appropriate video folder to replace the old files. Current video (after the above dates) contain these fixes, so check the dates if you are unsure – or just install them to be sure.

IRCV Manual – PDF File

Support Files
Latest Xvid codec
(This may be required for Windows 7 or Windows 8 support)

2008 version of the Microsoft Visual C++ 2008 Redistributable Package (x86)
Download Link

Real Course Videos Forum Link

Questions? Contact Us!

Other Downloads

Documents included with the software
Click here to go to the library (Documents on PDF)

Legacy software is any software product that has reached end-of-life status at RacerMate. End-of-life status simply means we are no longer developing or supporting new installations of this software. We supply these simply as a courtesy for customers who need them to maintain a previous installation on the same computer it was originally installed, but have lost the original disc. Because software often changes due to needs newer systems require, but older systems don’t get, older software often starts to fail at an increased rate when installed on a newer computer. As such support for it may not exist, other than to suggest getting the newer software, which was designed to run on the newer systems.

As a result of the above, users of legacy software may be required to upgrade to RacerMate one by purchasing it from our Upgrades page if they have an issue running legacy software on a newer computer.

Once software has reached end-of-life status, most support for it will end for all but the most basic installation questions. Users can also access our web forum to ask questions or search for answers previously posted. You can go to our forum here: RacerMate Forum.


Below you will find links to the last full versions of the legacy software. Installing these on computers newer than Windows 7 may result in unfavorable results, so proceed at your own risk with these.

CompuTrainer 3D, Version 3.0
Build August 2010 – Size: 75MB
Download here

CompuTrainer Coaching Software
Version 1.6 – Build 432 – Size: 2MB
Download here

Topo/GPC Course Creator, Version 2.0
Build March 31, 2008 – Size: 2MB
Download here

Have any questions?
Contact Us!

FTDI-BASED USB ADAPTERS

An FTDI-based adapter has been standard with CompuTrainer beginning in December 2008, at which point all in-house support for the Sewell adapter was suspended – except as noted below. The first FTDI USB-to-Serial adapter is recognized by the tan and blue housing with blue lights flashing when in use. The custom FTDI-based adapter, which now ships with all new CompuTrainers began shipping as of January 2009. It is recommended when any upgrade is made to include the RacerMate One software.

This driver executable is the same for all operating systems and will correctly detect and install the driver for the operating system you have.

Approved FTDI-based USB Drivers
This driver is the same for all FTDI adapters:
Approved Windows™ FTDI Driver

Note: Beginning with Windows™ 7, FTDI drivers are part of the drivers supplied with the Windows™ operating system and from Windows™ Update.

If you own an adapter older than Type 6 (current FTDI generation is Type 7) and you are experiencing connectivity issues, we highly recommend upgrading to the Type 7 FTDI USB Adapter.


PROLIFIC-BASED USB ADAPTERS

CompuTrainer™ and Velotron™ are both “serial devices” designed to communicate to the computer via a serial port. CompuTrainer™ was originally released having a 25-pin serial port, and then later a 9-pin serial port.

As serial ports began disappearing from computers and USB became dominant, RacerMate began using USB to Serial adapters – retaining the 9-pin adapter as well. Initially Prolific-based USB adapters were used and a shift was made to FTDI-based adapters due to poor support (from Prolific) for Windows™ Vista. FTDI was then commissioned to design an adapter specifically for our needs – eliminating the 9-pin adapter. This adapter is still in production.

You can go here to see a visual history of our HSB adapters or to figure out which adapter you have.

Sewell

The Sewell USB to Serial Adapter was standard on CompuTrainer™ for about 4 years. It is recognized by the blue housing marked with the words SEWELL.


Belkin

The Belkin USB to Serial Adapter was standard on Velotron™ for about 4 years until we moved to FTDI adapters. It is recognized by the hockey-puck shape and having detachable cables and power supply.


Bafo

The Bafo USB to Serial adapter was black and had a removable USB cable. It was in-use for only about 1 year and was replaced due to the product being discontinued by Bafo.


Prolific Drivers

The drivers shown below may NOT be the latest Sewell/Prolific. They are the drivers we have found to be the most stable when used with CompuTrainer or Velotron™. If you have a computer running Windows™ Vista, Windows™ 7 (any version), or Windows™ 8, and you have a Prolific-based USB adapter, we highly recommend upgrading to the current FTDI-based adapters. No drivers have been found for the Prolific-based adapters that work correctly with CompuTrainer or Velotron. If you have 32-bit Windows™ Vista and use the Sewell adapter, and have the operating system set to automatic updates, the operating system may update drivers without you knowing — thus replacing the working drivers with “newer” non-working drivers; in which case you must reinstall the older drivers again, by force.

Instructions: Unzip the files into a Sewell folder you create and using the driver update wizard in Device Manager, point the driver update to the location where these file reside.

Windows™ XP (zip file)

Windows™ Vista (zip file) (64-bit Vista, Windows™ 7, and Windows™ 8 users should NOT use the Prolific-based adapter)

Questions? Contact Us!

Additional Support

Forum link
Forum site

Questions?
Contact Us!



TOP